FAG Tapered roller bearings 32972In order to calculate the strand force of the belt drive, the belt mass and length are entered in the microcomputer before measurement. The FAG Top-Laser TRUMMY2 uses these to calculate the strand force, which is then compared with the specified nominal value. FAG Tapered roller bearings 32972 details as bellow: [...]
Nov
17
2010
17
2010
Nov
17
2010
17
2010
FAG Tapered roller bearings 32968
FAG Tapered roller bearings 32968By means of an impulse (for example by striking the stationary belt), the tensioned belt is excited to natural vibration. The individual static natural frequency thus generated is measured within seconds by the sensor of FAG Top-Laser TRUMMY2 using clock pulse light and displayed. FAG Tapered roller bearings 32968 details as [...]
Nov
16
2010
16
2010
FAG Tapered roller bearings 32964
FAG Tapered roller bearings 32964The user-friendly FAG Top-Laser TRUMMY2 can be used in many locations and comprises a cableless measurement probe, a measurement probe with a cable for difficult to access locations and a microprocessor that indicates relevant measurables for belt tension either as frequency [Hz] or force [N]. FAG Tapered roller bearings 32964 details [...]
Nov
16
2010
16
2010
FAG Tapered roller bearings 32960
FAG Tapered roller bearings 32960Optimum belt tension, like precise alignment of the belt pulleys (see FAG Top-Laser SMARTY2, page 56),is an essential precondition for achieving the maximum possible life of the belt drive. There is also less wear of the drive components,energy costs are reduced and cost-effectiveness is increased. FAG Tapered roller bearings 32960 details [...]
Nov
16
2010
16
2010
FAG Tapered roller bearings 32956
FAG Tapered roller bearings 32956The robust, handy FAG Top-Laser TRUMMY2 is an optical-electronic instrument for measuring and setting optimum belt tension (strand force).For detailed information,see publication TPI 182. FAG Tapered roller bearings 32956 details as bellow: main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs d 280 mm D 380 [...]
Nov
16
2010
16
2010
FAG Tapered roller bearings 32952
FAG Tapered roller bearings 32952Since the measuring instrument is so light, the emitter and target marks can be easily attached to non-magnetic drive pulleys using a strong, double-sided adhesive tape. FAG Tapered roller bearings 32952 details as bellow: main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs d 260 mm [...]
Nov
15
2010
15
2010
FAG Tapered roller bearings 32948
FAG Tapered roller bearings 32948The target marks are available in optical and digital form. In the case of the digital target mark, adjustment values are shown in the display in real time. Misalignments are presented in degrees and the parallelism offset in mm. FAG Tapered roller bearings 32948 details as bellow: main dimensions to DIN [...]
Nov
15
2010
15
2010
FAG Tapered roller bearings 32944
FAG Tapered roller bearings 32944The measuring device can be mounted in just a few seconds.The laser beam can be clearly seen on the target marks. Once the laser beam is adjusted to coincide with the slots in the target marks,the machine is correctly aligned. FAG Tapered roller bearings 32944 details as bellow: main dimensions to [...]
Nov
15
2010
15
2010
FAG Tapered roller bearings 32940-A
FAG Tapered roller bearings 32940-AThe FAG Top-Laser SMARTY2 is an economical measuring device for the alignment of belt pulleys and chain sprockets.Through the use of this device, the wear of belt drives, bearings and seals is reduced. Less vibration is generated and the running time and reliability of the machinery is increased. FAG Tapered roller [...]
Nov
15
2010
15
2010
FAG Tapered roller bearings 32938
FAG Tapered roller bearings 32938In place of the hydraulic grip coupling, slide couplings for button head lubrication nipples to DIN 3404 or other nozzles can be connected. These connectors are available from normal trade outlets. FAG Tapered roller bearings 32938 details as bellow: main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or [...]
