FAG cylindrical roller bearings NU1056-M1

FAG cylindrical roller bearings feature high radial load capacity because the rollers and raceway are in linear contact.FAG Cylindrical roller bearings NU1056-M1 can accommodate high radial loads, and are often used on machine tool spindles. FAG Cylindrical roller bearings NU1056-M1  types exhibit their best performance when used as free side bearings since they adjust to the shaft’s axial movement, to a certain extent, relative to the housing position.

FAG cylindrical roller bearings NU1056-M1 details:
d  280  mm       
D  420  mm       
B   65  mm  

Mass 31,4  kg 
Basic dynamic load rating, radial Cr   680000  N    
Basic static load rating, radial C0r    1100000  N    
Limiting speed nG    2800  1/min    
Reference speed  nB  1550  1/min    

26 pcs in stock

FAG cylindrical roller bearings Suffix
C3:Radial internal clearance larger than normal
C4:Radial internal clearance larger than C3
J30P:Black oxide coated
E:Increased capacity design
EX:Increased capacity design, design modified in accordance with standard (parts from these bearings must not be interchanged with parts from bearings of the same size of the previous design E)
M1:Solid brass cage, two-piece, roller-guided
TVP2:Solid window cage made from glass fibre reinforced polyamide PA66
JP3:Sheet steel window cage, single-piece, roller-guided
MP1A:Solid brass cage, single-piece, rib-guided on outer ring
MP1B:Machined brass cage, single-piece, rib-guided on inner ring
M1A:Solid brass cage, two-piece, rib-guided on outer ring
M1B:Solid brass cage, two-piece, rib-guided on inner ring

We could supply FAG cylindrical roller bearings NU1056-M1 Cheap, timely delivery ,in stock.The original brand name products to ensure product quality commitment.
our mail: cbearing@126.com

Relate products:
FAG Spherical roller bearings 23156-B-K-MB

One Response to “FAG cylindrical roller bearings NU1056-M1”

  1. […] products: FAG cylindrical roller bearings NU1056-M1 Posted June 7, 2010 by admin. Comments and trackbacks are open. Follow the comments feed. […]

Leave a Reply